Serial Connection Via Telecommunication Facilities - Siemens CP-8000 User Manual

7.7.1.1.2 Serial Connection via Telecommunication Facilities

Engineering PC and CP-8000 are connected via the serial interface (X2) via modems and al-
ternatively via a dedicated line, the public fixed network, or wireless radio.
SICAM TOOLBOX II
With CP-802x, a special modem cable (or standard patch cable and D-sub/RJ45 adapter)
must be used.
SICAM TOOLBOX II
Note
The circuitry of the modem cable (alternatively D-sub/RJ45 adapter) is dependent on the used modem.
You will find the corresponding circuitries in section 6.11.1,
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
serial
Modem
TOOLBOX II
Revision:
License Pak:
Version 5 | Siemen s AG
serial
Modem
Line, PSTN, GSM, ...
Standard patch cable
max. 1.8 m
TOOLBOX II
Revision :
License Pak:
Version 5 | Siemen s AG
Line, PSTN, GSM, ...
Direct cable
POK
RY
ER
ETH
LK1
PK 1
RS-232
OH2
RS-485
OH3
ETH
LK4
PK 4
X4
F1 F2 F3 F4
serial
Modem
CP-802x
Serial Communication.
Unrestricted
Preparing the Engineering
serial
Modem
CP-8000
SD
D-Sub/RJ45
adaptor
253