Siemens CP-8000 User Manual page 419

Halt Function
By means of clicking on the button
occur, then they are recorded furthermore in the event buffer, but not displayed in the table.
Depending on the state the button changes its design:
·
Event display halted and no new event occurred:
·
Event display halted and new event occurred:
By means of clicking the green button the new events are displayed in the table.
By means of clicking the general button
function, this is thereby not canceled.
Structure of the Table
Column
Class
Name
104 address
TI
Process text
Value
Quality
Time tag
Note
When selecting another menu within the session (e.g. settings, signals), the content of the table remains,
but the polling for new events is stopped. If the event page is reopened again, all events since leaving the
event page are automatically loaded.
If during the leaving of the event page a ring buffer overflow occurred, only the last 4000 events can be
loaded.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
you can halt the display of new events. If new events
the event list is reloaded. With activated halt
Value
Diagnosis
Process
<Signal name>
<IEC 60870-5-101/104 address>
<Number>
<Error class)
<Status name>
Coming
Going
<Status text On>
<Status text Off>
<Status text faulty position>
<Status text intermediate position>
NT
IV
YYYY-MM-DD,
Thh:mm:ss:ms+hh:mm
Engineering via SICAM WEB
Meaning/Note
Diagnosis event
Process event
Max. 99 characters, only if engineered with
SICAM WEB
(applies for process events)
Parameterized CASDU1-CASDU2-IOA1-
IOA2-IOA3
(applies for process events)
Type identification (30, 31, 45, 46)
(applies for process events)
Internal diagnosis class
(applies for diagnosis events)
Max. 13 characters
(applies for process events)
Defined status text
(applies for diagnosis events)
Freely parameterizable status text
(applies for process events)
At failure of I/O Module
If value invalid
(applies for process events)
Date and time
Unrestricted
419