Communication With The Engineering System (Sicam Toolbox Ii); Simplified Engineering Via Sicam Web - Siemens CP-8000 User Manual

3.1.3 Communication with the Engineering System
(SICAM TOOLBOX II)
For the communication between the SICAM TOOLBOX II and CP-8000/CP-802x exist differ-
ent variants:
·
Physical connection
─ Locally by means of a direct cable (RS-232 interface)
─ Remotely
− Serial communication link via modems (RS-232 or RS-485 interface)
− Ethernet connection (TCP/IP) and Terminal Server (RS-232 interface)
− Ethernet connection (TCP/IP)
·
Logical connection of the SICAM TOOLBOX II with that automation unit, that is the subject
of the engineering task:
─ Local automation unit
(that is that one, to which the physical connection exists, regardless in which of the
previously mentioned forms)
─ Remote automation unit
(automation unit that can be reached via the local automation unit; consistent remote
communication according to IEC 60870-5-101 or -104 is required)
Except for first-time initialization processes, all tasks are possible in each of the variants listed
above:
·
Parameter setting
·
Diagnostics
·
Test
·
Load firmware, load parameters
3.1.4

Simplified Engineering via SICAM WEB

For simple engineering tasks a webserver resides on the Master Module. The webserver pro-
vides the menus for the engineering and maintenance designed as websites. The engineering
takes place online via the Microsoft Internet Explorer ®.
The following functions are supported:
·
Configuration of I/O Master Module and protocol elements
·
System-technical parameter-setting
·
Diagnosis
·
Event list, alarm list
·
Process display, process simulation
·
Load backup file, save backup file
·
Application program handling (IL)
─ Configuration
─ Load code
─ Diagnosis
─ Online test
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
Unrestricted
Function Packages
57