Engineering via SICAM WEB
After the startup the configured I/O Modules appear in the directory tree under
SICAM A8000 CP-80xx | Master module | I/O Master module | <0...7>:
You find more detailed information on the I/O Modules in the manuals
SICAM RTUs Ÿ SICAM I/O Modules and SICAM RTUs Ÿ SICAM TM I/O Modules.
Please pay attention to the configuration notes and rules for the equipment of I/O Modules in
section 2.1.5,
Note
The detected configuration is checked with each additional startup against the actually connected
I/O Modules. With deviation the target device notifies an error.
If the once detected configuration is changed, pay attention to section 11.4.3,
Modules in the
334
Unrestricted
I/O
Modules.
Parameterization.
Adapt New Equipped I/O
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
<I/O module name>.