Settings For Internal Gprs Modem (Cp-8022) - Siemens CP-8000 User Manual

9.1.2.6

Settings for Internal GPRS Modem (CP-8022)

The settings for the internal GPRS modem reside in the direction tree under
SICAM A8000 CP-8022 | Master module | Network settings | GPRS
(the checkbox S
The GPRS communication is activated or deactivated with the parameter
munication. With selection
Mode of ethernet ports
nected ports in switch mode via 1 common IP address.
Common Settings
With the parameter
vider:
·
with selection
·
with selection
card; the operator list can be read out from the SD card, if the parameter
to operator
The entry for
responds to an unlocked SIM.
With parameter
default APN is used implicitly during the PDP context activation (acccess point name from
provider).
The
PPP authentication
If authentication is needed, then
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
HOW ALL PARAMETERS
YES the parameter string for GPRS is visible and the parameter
will be hidden. The both interfaces X1 and X4 operate as con-
Operator selection
automatic (default) the operator is read from the SIM card
manual the operator must be entered according to the corresponding SIM
list.
is needed if the SIM card is PIN protected. An empty PIN (default) cor-
SIM PIN
the acccess point name can be configured. If no APN is entered, then the
APN
is required depending on the operator's policy in particular APNs.
PPP user name
must be activated).
you can define how to select the mobile radio pro-
and
PPP password
Unrestricted
Engineering via SICAM WEB
enable GPRS com-
is set
GPRS log
have to be entered.
323