Do-6200 - Siemens CP-8000 User Manual

System Components and Technical Data
5.7.3.6

DO-6200

5.7.3.6.1 Functions
·
Pulse commands
─ Output of pulse commands
− 1-pole
─ Single, double and regulating step commands
─ Command output (OC)
─ Application functions and procedures according to IEC 60870-5-101/104
− Formal check
− Direct command
− Select and execute command ("select/execute")
─ Retry suppression
─ 1-out-of-n check
─ Control location check
─ Command locking
─ Synchronization
─ Revision
─ Command output time
− Settable
− Dependent on the process
─ Return information monitoring
─ Command prolongation
─ Switching sequences
─ Command output for the auto-reclose function
─ If outputs of the module are used for pulse commands, no outputs of the same module
can be used for binary information output
·
Binary information output
─ Selectable behavior on communication failure
(deactivation or retention)
─ Deactivation on module failure
─ Spontaneous transmission
─ Periodical transmission
─ If outputs of the module are used for binary information output, no outputs of the same
module can be used for pulse commands
─ Usage of outputs as Watchdog
·
Return information to pulse command assignment
─ Settable assignment for messages and pulse commands, which are acquired or output
on the I/O Master Module
─ Predefined assignment for messages and pulse commands, which are acquired or
output on the I/O Master Module
160
Unrestricted
t1
ta
t
or
a
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
ta
DC8-037-2.02, Edition 10.2017