Update Sicam Web - Siemens CP-8000 User Manual

Subsequently the following dialog appears:
You have the possibility to abort the restart of the device and to update further firmware.
·
Click on the button
9.3.8

Update SICAM WEB

This function gives you the possibility of using the most recent software for the SICAM WEB
application.
Select thereto the submenu Update application software .
You have the possibility to abort the procedure.
· Click Select a file in order to open the selection dialog
·
Select the source directory and the source file (the file type must be *.web)
·
Click on the button
The target device starts the loading procedure. The duration of the loading procedure de-
pends on the file size and the used communication connection.
Note
During loading procedures the website must not be left. The selection of another website may lead to the
occurrence of undefined states.
Subsequently the file is checked upon validity. If the data is valid, it is written on the SD card
of the target device. Otherwise, an error information is displayed.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
in order to restart the device
Unrestricted
Engineering via SICAM WEB
465