Configuration Of The Time Management - Siemens CP-8000 User Manual

9.1.5

Configuration of the Time Management

· Menu Home | Settings
9.1.5.1 Time Synchronization
The internal clock of CP-8000/CP-802x serves for the time tagging of generated data
·
from the periphery
·
from the optional Open/closed-loop control function
·
for the records in the diagnosis
The resolution of the time tag is 1 ms.
The settings for the time synchronization reside in the directory tree under
SICAM A8000 CP-80xx | Master module | Time management | Common settings
(the checkbox S
CP-8000/CP-802x supports the following time synchronization variants (selectable with pa-
rameter
Synchronizing of the automation
·
Remote synchronization via serial communication or via LAN
·
Free running
With the Parameter
mote synchronization is defined. If the time was already set and if there is no synchronization
within the parameterized time, a warning is recorded in the diagnosis.
With the Parameter
the monitoring time is defined (seconds or minutes).
You find the detailed information on the time synchronization reside in the manual SICAM
RTUs Common Functions System and Basic System Elements, chapter "System Services",
section "Time Management", section "Time Synchronization".
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
must be activated).
HOW ALL PARAMETERS
Monitoring time for synchroniz. event
Unit of time for free running and monitoring time
Engineering via SICAM WEB
unit):
the monitoring fort he re-
Unrestricted
the unit of
335