Preparing The Engineering; Engineering Tools - Siemens CP-8000 User Manual

Preparing the Engineering

7.1

Engineering Tools

CP-8000/CP-802x is a parameter-settable miniature telecontrol device with optional automa-
tion function. The engineering is alternatively possible via
·
SICAM TOOLBOX II, with tool OPM II
·
SICAM WEB
·
Device Manager
7.1.1 Differences
For the engineering via SICAM WEB no special knowledge of an engineering system is re-
quired, and also no licenses. The web user interface makes a very simple access to the pa-
rameter-setting of CP-8000/CP-802x.
The structure of the parameter blocks is basically identical structured like in the SICAM
TOOLBOX II, an exception is the parameterization of the periphery (not consistent).
The engineering via SICAM WEB is useful for simple applications. There are not all the func-
tions which offer the SICAM TOOLBOX II, available. You can find more details thereto section
7.8.2.9, Exceptions with Engineering via SICAM
You find an overview of the respective functions in the sections 8,
TOOLBOX II
7.1.2 Interlocking
The writing access to a target device is exclusive. This means, changes of the parameteriza-
tion of a target device are only possible with that engineering tool, with which engineering was
begun for the first time.
If a target device has been parameterized via SICAM WEB, it is not possible to take over the
parameterization into the SICAM TOOLBOX II. All online tools of the SICAM TOOLBOX II (di-
agnosis, dataflow test, message simulation, etc.) can not be used.
If a target device has been parameterized via the SICAM TOOLBOX II, there is only a reading
access possible via SICAM WEB (change of parameters not possible). The online functions
(diagnosis, process display) can be used in this case.
Note
CP-8000/CP-802x is delivered ex factory with an equipped SD card and a default web parameterization.
At the moment that you load SICAM TOOLBOX II parameters, the access via SICAM WEB is only reading
(role guest).
238
Unrestricted
and 9, Engineering via SICAM
WEB.
Engineering via SICAM
WEB.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017