E.5 Usage With Static Routes - Siemens CP-8000 User Manual

Sicam a8000 series
Hide thumbs Also See for CP-8000:
Table of Contents

Advertisement

Use Cases
E.5
Usage with Static Routes
E.5.1
General
Static routing is based on a fixed definition of the path of data packages between two end sys-
tems. This definition is written down by administrators in a routing table. This kind of routing
serves for security, respectively is used in network configurations, if several default gateways
are used.
Because of the big effort for the manual maintaining of the tables the number of routes is re-
stricted.
·
Number of static routes: 10
·
Parameter of static routes:
Source IP address
Destination IP address
Gateway IP address
Subnet mask
·
Interfaces: X1, X4
E.5.2
Configuration
Activation of the „static routes"
Parameter
Network settings | IP address | advanced parameters | Enable
static routes
Definition of the routing table
Parameter
Network settings | IP address | advanced parameters | static
=
Number of lines x
routes
Mode of the Ethernet Ports
Parameter
Network settings | IP address | Mode of ethernet ports
dress (connected ports in switch
The data packages are sent via the interfaces X1 and X4.
Parameter
Network settings | IP address | Mode of ethernet ports
dresses (independent
The data packages are sent via that interface (X1 or X4) to which the respective source IP
address
(Own IP address X0
592
Unrestricted
= YES.
(max. 10).
mode):
ports):
or
Own IP address
X1) is assigned.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
=
1 IP ad-
=
2 IP ad-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-8021Cp-8022

Table of Contents