Binary Information Output - Siemens CP-8000 User Manual

9.1.11.5.6 Binary Information Output

For the output of binary information a digital output module must be equipped, and the DO
signals to be used must be configured.
With the parameter
output upon failure of the Master Module. You find further information thereto in the manual
SICAM RTUs Common Functions Peripheral Elements According to IEC 60870-5-101/104,
chapter "Binary Information Output", section "Deactivation or Retention on Failure".
9.1.11.5.7 Current/Voltage Output
For the output of currents or Voltages an analog output module must be equipped, and the AO
signals to be used must be configured.
With the parameter
output upon failure of the Master Module. You find further information thereto in the manual
SICAM RTUs Common Functions Peripheral Elements According to IEC 60870-5-101/104,
chapter "Binary Information Output", section "Deactivation or Retention on Failure".
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
you can determine the behavior of a binary information
Fail_behav
you can determine the behavior of a binary information
Fail_behav
Engineering via SICAM WEB
Unrestricted
403