Synchronization Of The I/O Configuration In Sicam Pas - Siemens CP-8000 User Manual

·
SICAM A8000 CP-80xx | Master module | PRE0 | Connection definition
─ Since the IEC 60870-5-104 parameters in SICAM PAS can only be configured once for
all connection, the following parameters must be adjusted equally in all connection def-
inition:
Parameter
Stat. no.
IP address
Controlling/Controlled
Redundancy
Stop behaviour
Failure
Clear ring buffer
Data throughput limit in receive direction
Data throughput limit in send direction
Signals in the function diagram
Existing modules deliver signals. If the CASDU is invalid, it will be replaced by the CASDU pa-
rameterized on the Master Module.
Signals via I/O Modules
If available, each signal is described by its signal name, otherwise by its IEC 60870-5-104 ad-
dress.l
The I/O modules deliver all signals assigned to software data points depending on a hardware
pin.

9.1.12.1 Synchronization of the I/O Configuration in SICAM PAS

The configuration of the I/Os can be imported in SICAM PAS, for instance via a system con-
figurator. Thereto the configuration can be downloaded as XML file via a menu item in
SICAM WEB. You will find further details in section 9.3.5,
ration.
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
Engineering via SICAM WEB
Value
<internal station number>
<SICAM PAS>
Controlled
None
Save
Notify
No
0
0
Download SICAM PAS I/O Configu-
Unrestricted
407