Electromagnetic Compatibility (Emc) According To Iec 60947-4-1; Firmware Update; Recycling And Disposal - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

Basic protective measures against electrostatic discharge
• Make sure the grounding is good:
When handling electrostatic sensitive devices, ensure that your body, the workplace and
packaging are grounded. In this way, you can avoid becoming electrostatically charged.
• Avoid direct contact:
As a general rule, only touch electrostatic sensitive devices when this is unavoidable (e.g.
during maintenance work). Handle the devices without touching any chip pins or PCB traces.
In this way, the discharged energy cannot reach or damage sensitive devices.
Discharge your body before taking any necessary measurements on a device. Do so by
touching grounded metallic parts. Use only grounded measuring instruments.
2.4

Electromagnetic compatibility (EMC) according to IEC 60947-4-1

This product is designed for Environment A. It may produce radio interference in domestic
environments, in which case the user may be required to take adequate mitigation measures.
2.5

Firmware update

In order to be able to use the 3RW5 soft starter without any problems and with its full range of
functions, ensure that the firmware and software of all components are up-to-date (Page 139):
• 3RW5 soft starter, 3RW5 communication module, 3RW5 HMI High Feature
• HSP, GSDML file
• SIRIUS Soft Starter ES (TIA Portal)
You will find current downloads and a history of the versions with new features on the
3RW5 topic page (https://support.industry.siemens.com/cs/ww/en/view/109747404).
2.6

Recycling and disposal

For environmentally friendly recycling and disposal of your old device, please contact a company
certified for the disposal of old electrical and/or electronic devices and dispose of the device in
accordance with the regulations in your country.
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
Safety notes
2.6 Recycling and disposal
15