Siemens CP-8000 User Manual page 417

Example: single-point information output
·
In the directory tree, mark the corresponding DO module
·
Click on the side bar left beside the status area, if you want to extend it
·
Mark the row with the desired datapoint
Control area:
·
Select a "New value"
·
Click on the button
The new process value is transferred to the target device and displayed in the column V
Type Identifications and Possible Values
The following type identifications and attributes are supported to force a new process value:
Type identification
Single-point information
(TI 30)
Single command (TI 45)
Double command (TI 46)
Tap position command
(TI 47)
Measured value normal-
ized (TI 34)
Measured value scaled
(TI 35)
Measured value short
floating point (TI 36)
Setpoint command nor-
malized (TI 48)
Setpoint command scaled
(TI 49)
Setpoint command short
floating point (TI 50)
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
New value Select
before
execute
Off (0)
On (1)
Off (0)
On (1)
Off (01) No
On (10) Yes
Lower (01)
Higher (10)
-15
-1...+1
-32768...
+32767
15
-1.000•10 ...
15
+1.000•10
-15
-1...+1
No
-32768...
+32767
Yes
15
-1.000•10 ...
15
+1.000•10
Unrestricted
Engineering via SICAM WEB
Qualifier of command
No determination
Long command execution time
Short command execution time
Persistent command
.
ALUE
Origi-
nator
0...255
417