Siemens CP-8000 User Manual page 416

Engineering via SICAM WEB
Example: Setpoint command, normalized
·
In the directory tree, mark the corresponding AO module
·
Click on the side bar left beside the status area, if you want to extend it
·
Mark the row with the desired datapoint
Control area:
·
Select a "New value"
The data format corresponds to the setting of the data point on the I/O Module (signal list).
·
Select the "Select before execute" option
With selection
ecute command, when you click on the button
(select_execute_t).
With selection
The new process value is transferred to the target device and displayed in the column V
You find further details in the manual SICAM RTUs Common Functions Peripheral Elements
According to IEC 60870-5-101/104, chapter "Setpoint Values by means of Currents and Volt-
ages", section "Select and Execute Command".
416
Unrestricted
Yes and button you activate the select command. You activate the ex-
No and button you activate the execute command directly.
once more within the adjusted time
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
.
ALUE