Monitoring Of The Gprs Modem - Siemens CP-8000 User Manual

Engineering via SICAM WEB

9.1.2.6.1 Monitoring of the GPRS Modem

Additional settings for the handling in case of error reside in the direction tree under
SICAM A8000 CP-8022 | Master module | Network settings | GPRS | advanced parame-
ters.
With the parameter
procedure can be selected
tion to modem
With the parameter
dem error is defined for debugging
9.1.2.6.2 Monitoring of the Mobile Radio Network
Settings for the monitoring of the mobile radio network reside in the direction tree under
SICAM A8000 CP-8022 | Master module | Network settings | GPRS | Mobile radio ping
supervision.
With the setting
With this function, 5 ping request are sent with an interval of 20 seconds to up to 2 adjustable
IP addresses
ceived, the ping counts as failed attempt. After that, the cycle time
(60...3600 s)) is started for the next ping request.
After an adjustable number of failed attempts
(2...100)), a selectable reaction is triggered
ly/mobile connection
Interface Assignment
Furthermore, the assignment of the Ethernet interfaces according to the respective application
is necessary. You will find more information in section 9.1.7.2,
Communication.
You will find further information in appendix E.7,
(CP-8022).
324
Unrestricted
advanced parameters | GPRS logging
(Operators + Modem status
(AT-CMD). Logs will be saved on the SD card in the GPRS directory).
advanced parameters | Debug trigger
(None
Ping supervision enabled
(Ping peer IP address
re-establishment/
the detail level of the logging
/ Detailed logging of communica-
the action upon GPRS mo-
/ Stop logging on modem
= YES the belonging parameters get visible.
1, Ping peer IP address
(Ping interval
(Number of fails before action
(Action after ping failure
mobile module restart/device
Physical Interface for the
Usage of the Internal GPRS Modem
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
error).
2). If no reply is re-
(logging on-
reboot)).