Coupling Of External Sicam Tm I/O Modules - Siemens CP-8000 User Manual

6.4.5

Coupling of External SICAM TM I/O Modules

CP-8000 can be expanded with up to 6 external SICAM TM I/O Modules. Thereto the follow-
ing steps are essential:
·
Mounting of the coupling module for SICAM TM I/O Modules
·
Mounting of the bus connector for SICAM TM I/O Modules
·
Mounting of the SICAM TM I/O Modules
6.4.5.1 Mounting of the Coupling Module for SICAM TM I/O Modules
The coupling module (CM-6811) must be mounted on the right side of the CP-8000 housing.
To mount the coupling module it is necessary to remove the label
Afterwards lead the coupling module parallel to the housing
is engaged.
The mount of the coupling module at the housing can take place before or after the device is
mounted on the DIN rail (see
SICAM A8000
F 1 F2 F 3
Now you can mount CP-8000 on the DIN rail.
Note
The mounting of the coupling module can take place before or after the housing is mounted on the DIN rail
Mounting of the Master Module
(see
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
Mounting of the Master
SICAM CMIC
CP-8000
POK
j
RY
ER
E TH
L K 1
PK 1
R S-232
OH 2
R TX2
R S-485
OH 3
R TX3
E TH
L K 4
PK 4
SD
X 4
F 4
).
Installation and Circuitry
j
which covers the I/O bus.
k
and push it evenly on it until it
Module).
k
Unrestricted
183