Topology - Siemens CP-8000 User Manual

9.1.3.2

Topology

The settings for the topology reside in the directory tree under
SICAM A8000 CP-80xx | Master module |
Here is defined via which interface which remote stations are accessible, and which basical
data flow direction is needed to these remote stations (control direction, monitor direction or
both directions).
For the parameterization of remote stations you can insert lines with the button
With activation of the checkbox S
be made visible (the hidden expert parameters serve for special applications and need not to
be used in normal case).
9.1.3.3 Failure Behavior upon Fault
The setting for the failure behavior resides in the directory tree under
SICAM A8000 CP-80xx | Master module | BSE common
The occurance of a heavy fault can lead to an undefined state in the processing of the firm-
ware on the Master Module. Normally the target device stops thereby the firmware and rec-
ords an error in the diagnosis.
You can change this behavior with the parameter
The setting Restart firmware
tomatic startup in case of error. This might be advantageous upon a temporary error that dis-
appears by itself.
You find further information thereto in the manual SICAM RTUs Common Functions System
and Basic System Elements, chapter "System Services", section "Operating States", "Firm-
ware Shut Down".
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
Topology.
HOW ALL PARAMETERS
Failure
means that the firmware of the target device performs an au-
Unrestricted
Engineering via SICAM WEB
the complete parameter block can
settings.
behavior.
.
329