Versatile Communication, Integrated Node Functionality - Siemens CP-8000 User Manual

General Information
1.1.5

Versatile Communication, Integrated Node Functionality

There are several possible means of communicating with the control center:
·
Multi-point communications
You can connect external communications modules via the RS-232 or via the RS-485 in-
terface for transmission in joint traffic. The standard protocols are freely selectable
(IEC 80870-5-101, DNP 3.0, Modbus RTU). Additional protocols are available on request.
·
Dial-up traffic
Various connection-oriented transmission media are supported as standard via dial-up
traffic (PSTN, ISDN, GSM, TETRA).
·
LAN/WAN
In the case of communication via LAN/WAN networks, transmission is implemented in ac-
cordance with the standards IEC 60870-5-104 or IEC 61850 or DNP(i) – based on Ether-
net TCP/IP.
Further local devices can be connected in a very simple way via the further communication in-
terfaces, in order to connect them to an entire unit.
Networked Plant (Example)
SICAM AK 3
CP-8000
32
Unrestricted
Control Center
Ethernet TCP/IP - IEC 60870-5-104
CP-8000
PSTN/ISDN/GSM
based on
IEC 60870-5-101
Ethernet TCP/IP - IEC 60870-5-104
CP-8000
SIPROTEC
SICAM TOOLBOX II
Station Operation
CP-802x
CP-802x
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
NTP
Server
TFTP
Server
DNS
Server
RADIUS
Server
CP-802x
CP-802x
CP-8000