Edit: Step Function Screen - Waters 717plus Operator's Manual

I D L E
E d i t : S t e p F u n c t i o n
Note: Figure 4-11
option selected. When other options are selected, keys for the selected function appear.
If no option is enabled, the option field displays "None", and no option key appears.
Programming Step Functions
4
To program step functions:
1. Display the Edit: Step Function screen by pressing
Run screen.
The currently selected step number appears on the Edit: Step Function screen.
Editing Step
2. To change the step number, enter a new number on the keypad and press Enter.
Needle Position
3. Move the cursor to the Needle Position% line. This determines needle
withdrawal position. Use the right/left arrow keys to select the desired position of
25, 50, 75, or 100%. Default is 100%.
93 Operating the Autosampler
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 o f 1
E d i t i n g S t e p :
N e e d l e P o s i t i o n ( % ) ? 2 5
P u r g e A f t e r S t e p ? Y e s
O p t i o n ? N o n e S t d s
R u n E v e n t ( 0 = O f f
T i m e T i m e P r o g E v e n t
1
1 0 . 0 1 . 0
2 . 0 0
3 . 0 1
4 . 0 0
Figure 4-11 Edit: Step Function Screen
is an example of the Edit: Step Function screen with the Auto Transfer
T r n s
1
5 0 7 5 1 0 0
N o
A d d n T r n s
1 = O n )
T r n s A u t o
P a g e P a g e
Step Function on the Edit:Auto