Removing The Front Skin; Removing The Touch Panel Controller - Christie CP2208 Service Manual

Removing the front skin

1. Turn the projector off and then disconnect it from AC power.
2. Remove the top lid
3. Remove the card cage intake air filter cover. See
4. Remove the lens surround.
5. Remove the four screws that secure the skin to the projector structure.
6. Remove the set screws from the horizontal and vertical lens adjustment knobs and then pull the
knobs off.
7. Remove the three screws from the front skin and the one screw behind the filter cover.
8. Pull the front skin forward to remove it.

Removing the touch panel controller

1. Disconnect the touch panel controller (TPC) harness.
2. Slide the TPC mounting bracket out of the bracket support.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
. See Removing the top lid
Parts and Module Replacement
on page 33.
Inspecting the card cage filter on page 30.
34