Christie CP2208 Service Manual page 14

4. Open the integrator rod access door (A).
5. Loosen the two integrator rod set screws (A) and (B).
6. If the image is not parallel to the screen, rotate the integrator rod.
7. If the edges of the image are not in focus, loosen the two set screws on the end of the optical
housing and then move the handle (A) attached to the lens backward and forward.
8. Verify there an no shadows on the screen. If shadows appear, see
page 15.
9. Tighten all of the integrator rod set screws.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Adjusting the Image
Aligning the fold mirror on
14