Introduction; Safety Information; Projector Skins; Lamp - Christie CP2208 Service Manual

Introduction

This manual provides technical information for assisting qualified Christie authorized service
technicians in the servicing and repair of CP2208 projectors.
Every effort has been made to make sure the information in this manual is accurate and complete.
However, due to continuing research all information is subject to change without notice. Christie
assumes no responsibility for omissions or inaccuracies.
For Christie Integrated Media Block (IMB) operational procedures, see Christie Integrated Media
Block User Manual (P/N: 020-100845-XX).

Safety information

Projector skins

Warning! Failure to comply with the following could result in death or serious injury.
• UV HAZARD! When servicing the projector with the top lid removed anyone within the immediate
vicinity must wear safety glasses with side shields and Christie approved protective safety clothing
(P/N: 598900-095).
• Never operate the projector or the fans without all the covers installed.
Durable covers protect the components within the projector. Several removable covers (also called
skins) let you access serviceable components without disassembling the projector completely.

Lamp

Danger! Failure to comply with the following results in death or serious injury.
• EXPLOSION HAZARD! Only service technicians trained specifically by Christie on lamp replacement
and lamp safety may handle the lamp. High-pressure lamp may explode if improperly handled.
Always wear Christie approved protective safety clothing whenever the internal lamp door is open.
• EXPLOSION HAZARD! Lamp replacement must be performed by Christie trained personnel only.
Wear authorized protective clothing (P/N: 598900-095) whenever the lamp door is opened and
when handling the lamp. Never apply a twisting or bending force to the quartz lamp body. Use the
correct wattage lamp supplied by Christie. Make sure those within the facility of the projector are
also wearing protective safety clothing.
• HOT SURRFACE! Never attempt to remove the lamp when it is hot. The lamp is pressurized when
hot and may explode, causing personal injury or death and/or property damage. Allow the lamp to
cool completely.
Never exceed the warranted lamp lifetime by more than 20% because an old lamp becomes
increasingly fragile and more prone to sudden failure or even explosion. To see how many hours
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
8