Cleaning Projector Optics - Christie CP2208 Service Manual

Cleaning Projector
Optics
This section provides information and procedures for cleaning optical components in the Christie
projectors identified in the products list. Only these optical components can be cleaned:
• Reflector
• Integrator
The procedures must be performed by service personnel trained by Christie following consultation
with Christie support. Failure to follow this recommendation could result in damage to the projector
and void the warranty.
Typically, optical components do not need to be cleaned frequently if they are installed and
operated in a location that meets or exceeds the environmental standard recommended by Christie.
Christie recommends that all cinema projectors are installed and operated in an environment that
meets or exceeds Underwriters Laboratories (UL) standard 609.50 Pollution Degree 2 and ISO Class
9 Standard for Office Environments.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
• Light Engine Prism
• Projection Lens
• UV Filter
66