Fold Mirror - Christie CP2208 Service Manual

7. Grasp the top corners of the mirror, and then pull it up and out. When reinstalling the cold
mirror, make sure that the reflective surface faces inwards. Also, you must recalibrate MCGD.
See the CP2208 User Manual (P/N: 020-101916-xx).

Fold mirror

Wear gloves when you handle the fold mirror.
Fold Mirror 1 is accessed from the front left-corner of the projector. The alignment screws are
positioned along the top of the light tube, which allows them to be easily adjusted.
1. Turn the projector off and then disconnect it from AC power.
2. Remove the top lid. See
3. Remove the side skin. See
4. Remove the contrast aperture. See
5. Remove the light sensor module and move it aside.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Removing the top lid
Removing the exhaust panel skin
Removing the contrast aperture
Parts and Module Replacement
on page 33.
on page 39.
on page 60.
63