Safety Precautions; Recommended Service Kit - Christie CP2208 Service Manual

Safety precautions

Danger! Failure to comply with the following results in death or serious injury.
ELECTRICAL SHOCK HAZARD! Always turn off, disconnect, and disengage all power sources to the
projector before servicing.
Caution! Failure to comply with the following could result in minor or moderate injury.
Only Christie accredited service technicians are permitted to open any enclosure on the projector and
only if the AC power has been fully disconnected.
Notice. Failure to comply with the following may result in property damage.
• To prevent damage to electronic components by static electricity, wear an anti-static wrist strap
and follow anti-static protocols.
• Cleaning procedures should be performed in a clean, well lit, and dust-free environment that meets
or exceeds Underwriters Laboratories (UL) standard 609.50 and ISO Class 9 Standard for Office
Environments..
• When cleaning projector optics, never touch an optical surface with your bare hands.
• Always wear powder free latex gloves when handling and cleaning projector optics.

Recommended service kit

• Powder free latex gloves
• Soft camel-hair brush
• Dust-free blower - air bulb or a canned air duster without additives such as Techspray 1671-
10S Ultra-Pure Duster
• Lint-free lens tissue, such as Lensx 90 tissue or Newport Optics cleaning tissue
• Lens cleaning solution and a microfiber cloth (for the lens only)
• Isopropyl Alcohol Reagent Grade (ACS) 99.9%
• Acetone Reagent Grade (ACS)
• Optical grade cotton swabs with wooden stems
• Sticklers Fiber Optic Cleaner (can be used on all optical components)
• A bright, portable illumination device such as an LED flashlight
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Cleaning Projector Optics
67