Removing The Lens Mount - Christie CP2208 Service Manual

4. Remove the two screws that secure the light engine cover (A).
5. Remove the light engine blower. See
6. Remove the two screws that secure the douser to the light engine.
7. Lift the douser on an angle up and out of the projector.

Removing the lens mount

1. Turn the projector off and then disconnect it from AC power.
2. Remove the lens surround.
3. Remove the lens. See
4. Remove the top lid. See
5. Remove the front skin. See
6. Remove the four lens mount screws. It might be necessary to adjust the horizontal or vertical
position of the lens to access the screws.
7. Remove the lens mount.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Removing the light engine blower (fan 3)
Removing the lens on page 44.
Removing the top lid
Removing the front skin
Parts and Module Replacement
A
on page 33.
on page 34.
.
on page 58
52