Christie CP2208 Service Manual page 50

5. Remove the two screws that secure the light engine cover (A).
6. Remove the light engine blower.
7. Remove the light dump.
a. Disconnect the douser cable.
b. Loosen the captive screw securing the light dump and then lift the light dump up and out
of the projector.
8. Disconnect the LVDS cables from the backplane.
9. Remove the LVDS cables from the harness clips holding them to the center structure.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Parts and Module Replacement
A
50