3. Disconnect the TPC harness from the bracket support.
Removing the high security and light engine lid
1. Turn the projector off and then disconnect it from AC power.
2. Remove the top lid. See
3. Unlock the high security (A) lid with the high security key.
4. Lift the lid up and out.
5. Remove the two screws securing the light engine lid to the center structure and then lift the lid
up and out of the projector.
CP2208 Service Manual
020-101917-01 Rev. 1 (11-2015)
Removing the top lid
A
Parts and Module Replacement
on page 33.
35