Setting The Filter For Safety-Related Inputs - Siemens Sinamics G110M Original Instructions Manual

Functions
8.10 Safe Torque Off (STO) safety function
Figure 8-43
2. Select the signal that matches your particular application.
You have interconnected the "STO active" checkback signal. After STO has been selected,
the inverter signals "STO active" to the higher-level control.
Parameter
r9773.01
8.10.3.6

Setting the filter for safety-related inputs

Requirement
You are online with STARTER or Startdrive online.
Procedure with STARTER and Startdrive
To set the input filter and simultaneity monitoring of the safety-related input, proceed as
follows:
1. Navigate to the filter settings.
Figure 8-44
Figure 8-45
2. Set the debounce time for the F-DI input filter.
3. Set the discrepancy for the simultaneity monitoring.
4. Only applies to STARTER: Close the screen form.
You have set the input filter and the simultaneity monitoring of the safety-related input.
250
Interconnecting "STO active" in Startdrive
Description
1 signal: STO is active in the drive
Input filter and simuntaneity monitoring in STARTER
Input filter and simuntaneity monitoring in Startdrive
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD