Protection Of The Settings From Unauthorized Changes; Resetting The Safety Functions To The Factory Setting - Siemens Sinamics G110M Original Instructions Manual

Functions
8.10 Safe Torque Off (STO) safety function
8.10.3.2

Protection of the settings from unauthorized changes

The safety functions are protected against unauthorized changes by a password.
Table 8- 27
No.
p9761
p9762
p9763
8.10.3.3

Resetting the safety functions to the factory setting

Procedure with STARTER
To reset the safety function settings to the factory setting without changing the standard
settings, proceed as follows:
1. Go online.
2. Open the screen form of the safety functions.
3. Select the button to restore the factory settings.
4. Enter the password,for the safety functions.
5. Confirm that the parameters have been saved (RAM to ROM).
6. Go offline.
7. Switch off the inverter supply voltage.
8. Wait until all LEDs on the inverter go dark.
9. Switch on the inverter supply voltage again.
You have restored the safety functions in the inverter to the factory settings.
246
Parameter
Description
Entering a password (factory setting 0000 hex)
Permissible passwords lie in the range 1 ... FFFF FFFF.
New password
Confirm password
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD