Siemens Sinamics G110M Original Instructions Manual page 72

Installation
4.3 Electrical Installation
Figure 4-16
Note
Adaption of inputs and outputs
Further adaption of the inputs and outputs of the Inverter are possible, please refer to
relevant section in the SINAMICS G110M Operating Instructions for further information.
The internal motor and power connections on the G110M system are located inside the
Control Unit and motor housing. The connections are shown in the following figure.
Figure 4-17 Control Unit motor and power connections
See also
Adapt inputs and outputs (Page 117)
72
24 V glanded input and output connections
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD