Siemens Sinamics G110M Original Instructions Manual page 95

The DIP switches allows specific functions of the converter to be set and are shown in the
table below.
Table 5- 1 Function of the DIP switches
DIP switch Function
①
Selects current or voltage input for the analog inputs.
Temperature sensor - sets the type of temperature sensor fitted to the motor.
87 Hz characteristic - set "ON" to operate the motor with the 87 Hz characteristic.
Electromechanical (EM) brake - select on if an EM brake is fitted.
Motor reverse
②
Switching frequency - the user can select one of seven different switching frequencies.
Ramp-up and ramp-down timings - user can select from 0.1 seconds to 70 seconds
③
PROFIBUS address DIP-switch for use with the PROFIBUS and USS variant of the CU240M.
Examples of the DIP switches and their individual settings are illustrated in the figures below.
Figure 5-6 PROFIBUS address DIP Switch
SINAMICS G110M Operating Instructions
Operating Instructions, 04/2015, FW V4.7.3, A5E31298649B AD
Commissioning
5.2 Basic commissioning
95