EBARA EV-S20 Instruction Manual page 70

Pin No. Signal name
1 RESET (+)
2 SAVING ENERGY CONTROL (+)
3 RESERVED (+)
4 RESERVED (+)
5 RESERVED (+)
6 EMS STATUS (+) *1
7 PUMP N2 WARNING STATUS (+) *2
8 RESERVED (+)
9 SAVING ENERGY STATUS (+)
10 RESERVED (+)
11 RESERVED (+)
12 RESERVED (+)
−
13
14 RESET (−)
15 SAVING ENERGY CONTROL (−)
16 RESERVED (−)
17 RESERVED (−)
18 RESERVED (−)
19 EMS STATUS (−) *1
20 PUMP N2 WARNING STATUS (−)*2
21 RESERVED (−)
22 SAVING ENERGY STATUS (−)
23 RESERVED (−)
24 RESERVED (−)
25 RESERVED (−)
*1 : Optional
*2 : Only "P" and "N" model.
*3 : It can change to "Abnormality:OPEN, Alternate" by DIP SW. setting.
PM10U
13
25
25 Pin D Sub-Miniature Female Receptacle
(As seen from connecting side)
Table 4.8 Control Connector Pin Assignment (CN-Y)
Screw lock size: M2.6
1
14
Contact pin surface: Au
Fig. 4.7
I/O Signal type
IN RESET:CLOSE
SAVING ENERGY MODE:CLOSE,
IN
Alternate
IN
IN
IN
OUT EMS:OPEN, Alternate
OUT Abnormality:CLOSE, Alternate *3
OUT
SAVING ENERGY MODE:CLOSE,
OUT
Alternate
OUT
OUT
OUT
P.51
EBARA
CORPORATION