Default Values - Daikin MicroTech II Installation And Maintenance Manual

Default Values

Keypad Menu Path:
This configuration network parameter determines which set of values is used on power up and
communication failure. The choice is the stated default values or a list of manufacturer specified values.
No Keypad Equivalent
This is used for the following configuration network variables: (D10)
• Chiller Enable
• Capacity Limit
• Cool Setpoint
• Heat Setpoint
• Mode
Measurement
Chiller State
LONWORKS
Variable Details
LONWORKS Name Profile
nciDefaults Chiller
Structure
typedef struct {
unsigned value;
signed state;
} SNVT_switch;
Valid Range
Value Field unused
State Field 0 Use Default Values
1 Use Manufacturer-Specified Values
www.DaikinApplied.com
Units Data Type
NA LONWORKS: structure
SNVT Type SNVT Index
switch
59
Valid Range
Enumerated
SNVT Size
95 two bytes
ED 15062-7 • MICROTECH II CHILLER CONTROLLER
d d P I
eTaIled aTa oInT nformaTIon
Default Value
0 = Use Default Values
SCPT_Reference SCPT Index
SCPT_
DefaultBehavior
71