Chiller Enable - Daikin MicroTech II Installation And Maintenance Manual

Chiller Enable

Keypad Menu Path:
This LONWORKS configuration variable sets the default power-up and restart mode of the chiller,
unless the configuration parameter nciDefaults = 1 (See
No Keypad Equivalent
1, the default values are the values specified during manufacturing. Refer to the appropriate Operating
Manual for suitable variable values.
Measurement
Chiller State
LONWORKS
Variable Details
LONWORKS Name Profile
nciChillerEnable Chiller
Default Value
0 = Request Chiller Off
The chiller object uses the configuration value of nciChillerEnable on power-up or loss of communication unless the configuration
parameter nciDefaults =1 (See
Structure
typedef struct {
unsigned value;
signed state;
} SNVT_switch;
Valid Range
Value Field unused
State Field 0 Request Chiller Off
1 Request Chiller Auto (run)
0xff Invalid
www.DaikinApplied.com
Units
NA LONWORKS: structure
SNVT Type
switch
Default Values on page 59).
Default Values on page
Data Type Valid Range
Enumerated
SNVT Index SNVT Size
95 two bytes
27 ED 15062-7 • MICROTECH II CHILLER CONTROLLER
d d P I
eTaIled aTa oInT nformaTIon
59). If nciDefaults =
Default Value
See Below
SCPT_Reference SCPT_ Index
SCPTpwrUpState 73