Condenser Pump Run Hours - Daikin MicroTech II Installation And Maintenance Manual

Condenser Pump Run Hours

Keypad Menu Path: NOTE: Value returned must be multiplied by 10 to give run hours.
No Keypad Equivalent
Measurement
Event Count
BACnet
Pump Select
This output network variable indicates the number of hours (x10) that the selected condenser pump motor has been turned on. See
Pump Select on page 85. (I48)
Object Type
Analog Input
Pump #2
This output network variable indicates the number of hours (x10) that the selected condenser pump 2 has been turned on. Not
available on all chiller models. (I104)
Object Type
Analog Input
LONWORKS
Variable Details
This output network variable indicates the number of hours (x10) that the selected condenser pump motor has been turned on. See
Pump Select on page 85. (I48)
LONWORKS Name
nvoCondPumpHrs
www.DaikinApplied.com
Units
NA
LONWORKS: Fixed-Point
Scalar signed long
Object Identifier
Type Enumeration
0
CondPumpOperHours
Object Identifier
Type Enumeration
0
Profile
Proprietary
Data Type Valid Range
BACnet: Real
Instance Property Name
28 Present Value
Object Name
Instance Property Name
90 Present Value
Object Name
CondPmp2Hrs
SNVT Type SNVT Index
count
53 ED 15062-7 • MICROTECH II CHILLER CONTROLLER
d d P
eTaIled aTa oInT
Default Value
0–65,535
Property Identifier
Property Enumeration
Property Identifier
Property Enumeration
SNVT Size
8 two bytes
I
nformaTIon
NA
85
85