Firm Load - Canon imageFORMULA P-215 Service Manual

10. Firm Load

Firmware and "CaptureOnTouch Lite"
are changed in this mode. For details, refer
to service information provided when firm-
ware is changed. Do not misuse this mode.
Operation Procedure
1) On the service screen, select [Firm Load].
2) The screen is displayed requiring the file in
which software is stored to be selected.
3) Select and open the file.
4) It is loaded automatically and a progress
screen is displayed.
Figure 5-229
5) When the load is finished, the progress
screen disappears and the service screen
returns. The cumulative number of sheets
displayed at the bottom of the service
screen is "0: zero".
Figure 5-230
COPYRIGHT © CANON ELECTRONICS INC. 2011
6) Select "Close" on the service screen and
close the pickup tray.
Note: The power stays on even when the
pickup tray is closed at this time.
7) Remove and reconnect the USB cable.
8) Start the service tool and verify that the
version and the total scanning count dis-
played on the service screen are correct.
Note: Do not turn the power OFF including
the USB cable is removed during
loading. If the power is turned OFF, it
returns to its original state when re-
started, but this is not guaranteed.
CANON P-215 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Figure 5-231
5-15