Maintenance; Daily Maintenance; Cleaning The Scanner; Cleaning The Inside Of The Scanner - Canon imageFORMULA DR-M1060II User Manual

Maintenance

Daily Maintenance

Clean the scanner on a regular basis, as described below, to maintain
peak scanning quality.
CAUTION
• When cleaning the scanner and the inside of the scanner, turn OFF
the power switch and disconnect the power cord from the power
outlet.
• Do not use spray cleaners to clean the scanner. Precision
mechanisms, such as the light source, may get wet, and cause a
malfunction.
• Never use paint thinner, alcohol, or other organic solvents to clean
the scanner. The exterior of the scanner may become deformed,
discolored, or melted. It may also cause a fire or electric shock.

Cleaning the Scanner

To clean the outside of the scanner, wipe off any dirt with a cloth that
has been dampened with water and thoroughly wrung out, and then
wipe the scanner dry with a clean dry cloth.

Cleaning the Inside of the Scanner

Dust or paper particles inside the scanner may cause lines or
smudges to appear on scanned images. Use a dry cloth, for example,
to periodically remove dust and paper particles from the inside of the
scanner. Use compressed air to remove any dust that cannot be
removed with the cloth. After finishing a large scanning job, turn OFF
the scanner and then clean out any paper particles remaining inside
the scanner.
Cleaning the Sensor Glass and the
Rollers
If scanned images contain streaks, or if the scanned documents
become dirty, the sensor glass or rollers inside the scanner may be
dirty. Clean them periodically.
1
Open the document feed tray.
46