Upper Cover - Canon imageFORMULA DR-M160 Service Manual

Hide thumbs Also See for imageFORMULA DR-M160:
Table of Contents

Advertisement

CHAPTER 3 DISASSEMBLY & REASSEMBLY
Notes on assembling
If the one-way bearing has become
detached, install it with the display
surface of the one-way bearing facing
the outside and aligned with the position
setter.
Figure 3-103
3-2

3. Upper Cover

1) While holding down the end of the upper
cover, unhook the 4 fitting parts
the bottom side using a tool. Next,
unhook the 2 pairs of fitting parts
the top side and remove the upper cover
3
Note: Unhook the fitting part on the bottom
COPYRIGHT © CANON ELECTRONICS INC. 2011
.
side by bending the hooks in the
downward direction while pushing
towards the far side. When you
remove the upper cover unit, lock
lever shaft and coil spring on the
inside may become detached.
Figure 3-104
CANON DR-M160 FIRST EDITION
on
1
on
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents