Ratings - YASKAWA SGM7D Product Manual

6.2 Specifications and Ratings
6.2.1 Specifications
*4.
The given values are for when the Servomotor shaft is mounted horizontally and shock or vibration is applied in
the directions shown in the following figures.
The strength of the vibration that the Servomotor can withstand depends on the application. Check the vibration
acceleration rate.
Shock Applied to the Servomotor
*5. Use derated values for this combination. Refer to the following section for information on derating values.
6-4
Vertical
Front to back
Vibration Applied to the Servomotor
6.2.2 Ratings on page 6-5
Vertical
Side to side