X84; „ User Calibration; User Calibration - Konica Minolta CM-25cG Instruction Manual

User Calibration

„ „
You can perform calibration by using your own reference plate and calibration data instead of white calibration.
The calibration data for user calibration can be specified by connecting the instrument to a PC and using the
optional Color Data Software "SpectraMagic DX". Select whether to use the user calibration data for measurement
on the "Calibration setup" > "User Calibration" (refer to page 112) of the instrument.
Operating Procedure Start the procedure from the measurement screen.
1
Perform user calibration instead of white
calibration.
Before user calibration can be set to ON, user calibration
Notes
data must be prepared and written to the instrument
memory.
2
Set the instrument on the user tile so that the
measuring port is over the tile.
3
Press the measurement button.
User calibration will be performed.
When the user calibration is completed, the screen returns
to the one displayed before the <Calibration> screen.
Please set the
instrument on the user
tile and press the
measurement button.
User ID: xxxxxxx
CALIBRATION
Calibrating to user std
2
36