Print
Print the target color data. The instrument must be connected to the serial printer in advance. For instructions on
how to connect the instrument to a serial printer, refer to page 103 "Connecting to a Printer/Barcode Reader".
• Display the target color to be printed on the <Target> screen in advance.
Notes
• If a proper connection is not established, printing will not be possible.
• Even if the connection has been correctly established, printing may fail for reasons such as the printer being
turned off when printing is attempted.
Operating Procedure
1
Use [] or [] to move the cursor to "Print data",
and press the [Confirmation] key. Printing will begin
from the connected printer.
When the printing is complete, the screen returns to the
<Target> screen.
The <Print> screen is also displayed when printing will
Notes
not be processed properly such as when the printer is
not correctly connected.
53
Start the procedure from the <Target menu> screen.
Target
Target menu [0003]
Print data
Edit name
Bumper
Data management
⏎
Pass/Fail
⏎