X84; „ Default Data Settings; Default Data Settings - Konica Minolta CM-25cG Instruction Manual

Default Data Settings

„ „
This instrument allows pass/fail judgment criteria to be set for individual target color data. Until such judgment
criteria are set, the instrument is set with the default tolerance. Users can edit the tolerance that will be used as the
judgment criteria as well as edit the warning level and the parametric coefficient default value.
• When a new target is measured, the default settings are initially applied.
Memo
• The default judgment criteria is set before judgment criteria for each target is set.
• Changing the default judgment criteria after the judgment criteria has already been set for individual target colors,
the judgment criteria specified for these target colors will not be changed.
• The optional Color Data Software "SpectraMagic DX" allows for easy configuration and use of judgment criteria.
Operating Procedure
1
Press [MENU], and then use [] or [] to display the <Setting> screen.
2
Use [] or [] to move the cursor to "Default data setup", and then press the [Confirmation] key
to display the <Default data setup> screen.
65
Start the procedure from the measurement screen.
Sample 0003 Bumper
Setting
Default data setup
⏎
Calibration setup
⏎
Communication setup
⏎
Instrument setup
⏎
Diagnosis info.
Sample 0003 Bumper
Setting
Default data setup
Default tolerance
Warning level
0%
Parametric coef.
Set group