X85; „ Pin Code Configuration - Konica Minolta CM-25cG Instruction Manual

PIN Code Configuration
… „
Enter the PIN set for the printer/scanner (already confirmed).
Operating Procedure
1
Use [] or [] to move the cursor to "Printer PIN code" or "Scanner PIN code", and then press
the [Confirmation] key.
• The initial value of the PIN code is "0000".
2
 and  will be displayed above and below the PIN. Use [] or [] to specify a value. Use [] or
[] to move between digits.
• The personal identification number (PIN) should consist of between four and eight numbers (0 to 9).
3
After inputting the numbers, move the cursor to [OK] and press the [Confirmation] key.
The printer/reader will be connectable as an I/O device for the instrument, and the display will return to the
<Communication setup> screen.
If [ESC] is pressed during configuration, or if the cursor is moved to "Cancel" and the [Confirmation] key is pressed,
Memo
the settings will not be changed and the screen will return to the <Communication setup> screen.
105
Start the procedure from the <Setting> - <Communication setup> screen.
Sample 0003 Bumper
Setting
Communication setup
Printer address
000000000000
Printer PIN code
0000
Scanner address
000000000000
Scanner PIN code
0000
Sample
0003Bumper45
Printer PIN code
01234567
0 1 2 3 4 5
6 7 8 9
OK Cancel
Sample 0003 Bumper
Setting
Communication setup
Printer address
000000000000
Printer PIN code
0000
Scanner address
000000000000
Scanner PIN code
0000
Sample
0003Bumper45
Scanner PIN code
01234567
0 1 2 3 4 5
6 7 8 9
OK Cancel