X85; „ Observer/Illuminant 2 - Konica Minolta CM-25cG Instruction Manual

Observer/Illuminant 2
… „
Select the secondary illuminant used for MI (metamerism index) calculation, etc.
Observer/Illuminant 2 is set to "10°/F11" when the instrument is shipped from the factory.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Observer/
Illuminant 2", and then press the [Confirmation] key.
The <Observer/Illuminant 2> screen is displayed.
2
Use [] or [] to move the cursor to the desired
item.
Settings
The setting values are the same as those for "Observer/
{ „
Illuminant 1" and "None".
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Observer/Illuminant> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Observer/Illuminant> screen.
81
Start the procedure from the <Measurement cond.> - <Observer/Illuminant> screen.
Sample 0003 Bumper
Measurement cond.
Observer/Illuminant
Observer/Illuminant 1
10°/D65
Observer/Illuminant 2
2°/A
Observer/Illuminant 2
2°/F8
2°/F10
2°/F11
2°/F12
2°/User
10°/A
10°/C
10°/D50
10°/D65
10°/ID50
10°/ID65