System Settings; X84; „ Calibration Setup; Calibration Setup - Konica Minolta CM-25cG Instruction Manual

System Settings

This section explains how to configure calibration, how to display the instrument diagnosis info., and how to
display the instrument info.
Operating Procedure
1
Press [MENU], and then use [] or [] to display the
<Setting> screen.
To return to the previous screen, press [MENU] or [ESC].
Memo

Calibration Setup

„ „
Configure the instrument calibration settings.
Operating Procedure
1
Use [] or [] to move the cursor to "Calibration
setup", and then press the [Confirmation] key.
109
Start the procedure from the measurement screen.
Start the procedure from the <Setting> screen.
Sample 0003 Bumper
Setting
Default data setup
⏎
Calibration setup
⏎
Communication setup
⏎
Instrument setup
⏎
Diagnosis info.
Sample 0003 Bumper
Setting
Default data setup
⏎
Calibration setup
⏎
Communication setup
⏎
Instrument setup
⏎
Diagnosis info.
Sample 0003 Bumper
Setting
Calibration setup
Calibration interval
8 (hour)
Annual calibration
ON
User calibration
OFF