X85; „ Data Protection - Konica Minolta CM-25cG Instruction Manual

Data Protection
… „
Data protection can be specified so that the saved target color settings will not be deleted or changed by accident.
When the data protection is set, you cannot select "Edit name", "Edit tolerance", "Delete data" or "Delete all data"
on the <Target menu> screen, and overwrite measurement cannot be performed.
Protect data is set to "OFF" when the instrument is shipped from the factory.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Protect data",
and then press the [Confirmation] key.
The <Protect data> screen is displayed.
2
Use [] or [] to move the cursor to the desired
item.
Settings
OFF : Do not protect the data.
{ „
ON : Protect the data.
{ „
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Data management> screen. When protection is turned
ON, the key icon indicating data protection is turned ON
will be displayed in the status bar.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Data management> screen.
59
Start the procedure from the <Target menu> - <Data management> screen.
Sample
Target menu [0003]
Data management
Change list position
Edit Target filter
OFF
Protect data
OFF
Delete all data
Protect data
OFF
ON