X85; „ Auto Print - Konica Minolta CM-25cG Instruction Manual

Auto Print
… „
Measurement results can be automatically printed for every measurement.
• The instrument must be connected to the printer in advance.
Notes
• The optional accessory Bluetooth printer CM-A234 can only print text. Spectral graphs, color difference
graphs, and other graphics displayed on the instrument cannot be printed.
Auto print is set to "OFF" when the instrument is shipped from the factory.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Auto print",
and then press the [Confirmation] key.
The <Auto print> screen is displayed.
2
Use [] or [] to move the cursor to "ON", and then
press the [Confirmation] key.
The Auto Print function will turn ON, and printing will be
performed every time measurement is performed. After the
settings have been configured, the display will return to the
<Communication setup> screen.
Print Example 1
Display type set to "Spectral Graph"
Sample
0004
100
2016/07/21 11:56:14
0002 Panel
Print Example 2
Display type set to "Diff. Graph"
Sample
0004
2016/07/21 11:56:14
0002 Panel
107
Start the procedure from the <Setting> - <Communication setup> screen.
0003 Bumper
No Name
Reflectance
70.05
400 nm
%
>
0
400 nm
Move nm using the OK button.
MAV
○ ○ ○ ○ ○ ○ ○ ●
0003 Bumper
No Name
10°/D65 2°/C
0.08 0.07
∆ L *
-0.05 0.05
∆ a *
0.01 -0.08
∆ b *
0.10 0.10
∆ G U
∆L* ∆b*
∆GU ∆a*
Tolerance line ①━━━ ②━━━
MAV
○ ○ ○ ○ ○ ○ ● ○
Sample
If the color difference result is "Fail", an "×" will be
Memo
printed after the value.
0003 Bumper
Setting
Communication setup
Auto print
OFF
Bluetooth
ON
Meter PIN code
0000
Printer address
000000000000