X85; „ Buzzer - Konica Minolta CM-25cG Instruction Manual

Buzzer
… „
Operation sounds can be set to ON or OFF.
The buzzer is set to "ON" when the instrument is shipped from the factory.
Memo
Operating Procedure
1
Use [] or [] to move the cursor to "Beep", and
then press the [Confirmation] key.
The <Beep> setting screen is displayed.
2
Use [] or [] to move the cursor to ON or OFF.
Settings
OFF
{ „
ON (Standard)
{ „
3
Press the [Confirmation] key to confirm, and then
press [ESC].
The selection is confirmed and the screen returns to the
<Instrument setup> screen.
If [ESC] is pressed without pressing the [Confirmation]
Notes
key, the settings will not be changed and the screen will
return to the <Instrument setup> screen.
93
Start the procedure from the <Setting> - <Instrument setup> screen.
Sample 0003 Bumper
Setting
Instrument setup
Date format
yyyy/mm/dd
Date & time
2016/07/21
Brightness
3
Beep
ON
Beep
OFF
ON